SHELL壳牌石油公司DEP标准

foxman · 发表于 2009-7-8 09:53

谁有最新的2005年以后出的DEP标准呀，
如果有的话，请上传，万分感谢。

PX98 · 发表于 2009-7-16 13:20

非常感谢楼主的资料共享。

qilianshanez · 发表于 2009-7-16 19:16

84年的只能参考啊，2.25Cr-1Mo20年内发展挺快

zhaottn · 发表于 2009-7-20 19:13

好东西啊
终于下完了

leemh · 发表于 2009-7-30 10:17

还是谢谢！但是我觉得不好，我做了shell的项目。作为一个工程师还是要保持confidential. 当然随便大家评。（不要骂我）但是我给大家一个目录：

[ 本帖最后由 leemh 于 2009-7-30 10:35 编辑 ]

leemh · 发表于 2009-7-30 10:34

MECHANICAL ENGINEERING
2.1 GENERAL
Title DEP Number
Heat transfer fluid (HTF) systems DEP 20.05.50.10-Gen.
Fuel systems DEP 20.05.60.10-Gen.
Equipment in LPG installations DEP 30.06.10.11-Gen.
Pressurised bulk storage installations for LPG DEP 30.06.10.12-Gen.
LPG - bulk transfer and transportation DEP 30.06.10.13-Gen.
ESD systems for loading and discharging refrigerated and pressurised LNG and LPG carriers DEP 30.06.10.20-Gen.
Glass lined steel equipment and piping DEP 30.48.70.30-Gen.
Chemical injection facilities DEP 31.01.10.10-Gen.
Loading facilities for bulk road vehicles DEP 31.06.11.11-Gen.
Symbols and identification system – Mechanical DEP 31.10.03.10-Gen.
Gaseous oxygen systems DEP 31.10.11.31-Gen.
Instrument air supply DEP 31.37.00.11-Gen.
Diesel oil systems in oil and gas production facilities DEP 37.05.10.11-Gen.
2.2 EQUIPMENT
2.2.1 General/noise/safety relief systems
Noise control (amendments/supplements to ISO 15664) DEP 31.10.00.31-Gen.
Fabric expansion joints - Selection and application DEP 31.24.40.12-Gen.
Filters for removing particles from hydroprocesser feeds - type selection and design rules DEP 31.27.21.10-Gen.
Dry electrostatic precipitators DEP 31.27.21.30-Gen.
Steam jet vacuum ejector sets DEP 31.29.56.31-Gen.
Hydraulic systems for remote operation of shut-off valves DEP 31.36.10.30-Gen.
PTFE bellows DEP 31.38.82.31-Gen.
Acoustic insulation for piping DEP 31.46.00.31-Gen.
Relief valves - selection, sizing and specification DEP 80.36.00.30-Gen.
Pressure relief, emergency depressuring, flare and vent systems DEP 80.45.10.10-Gen.
Interlocking systems for safety/relief valves DEP 80.46.30.11-Gen.
2.2.2 Boilers/furnaces
Title DEP Number
Water-tube boiler installations DEP 30.75.10.30-Gen.
Gas turbine heat recovery steam generators DEP 30.75.10.31-Gen.
Fired heaters, including waste heat boilers (amendments/supplements to API 560) DEP 31.24.00.30-Gen.
2.2.3 Heat exchangers
Fouling resistances for heat transfer equipment DEP 20.21.00.31-Gen.
Shell-and-tube heat exchangers (amendments/supplements to ISO 16812) DEP 31.21.01.30-Gen.
Selected construction materials for shell-and-tube heat exchangers DEP 31.21.01.31-Gen.
Plate and frame heat exchangers (amendments/supplements to ISO 15547) DEP 31.21.01.32-Gen.
Air-cooled heat exchangers (amendments/supplements to ISO 13706) DEP 31.21.70.31-Gen.
2.2.4 Vessels/columns/reactors
Internals for columns DEP 31.20.20.31-Gen.
Rotating disc contactors DEP 31.22.01.31-Gen.
Gas/liquid separators - Type selection and design rules DEP 31.22.05.11-Gen.
Liquid/liquid and gas/liquid/liquid (three-phase) separators - Type selection and design rules DEP 31.22.05.12-Gen.
Pressure vessels (amendments/supplements to PD 5500) DEP 31.22.10.32-Gen.
Manufacturing report for pressure vessels DEP 31.22.10.35-Gen.
Unfired pressure vessels (amendments/supplements to EN 13445) DEP 31.22.11.32-Gen.
Pressure vessels (amendments/supplements to ASME VIII, Division 1 and Division 2) DEP 31.22.20.31-Gen.
Glass-fibre reinforced epoxy and polyester vessels - design and installation DEP 31.22.30.14-Gen.
Materials and fabrication requirements for Cr-Mo heavy wall pressure vessels (amendments/supplements to API RP 934) DEP 30.10.02.32-Gen.

leemh · 发表于 2009-7-30 10:34

2.2.5 Rotating equipment
Title DEP Number
Hoisting facilities and weather protection for rotating equipment DEP 31.25.00.10.Gen.
Installation of rotating equipment (amendments/supplements to API RP 686) DEP 31.29.00.10-Gen.
Oil mist lubrication systems DEP 31.29.00.30-Gen.
Petroleum and natural gas industries - high-speed special-purpose gear units (amendments/supplements to ISO 13691) DEP 31.29.00.32-Gen.
Shaft sealing systems for centrifugal and rotary pumps (amendments/supplements to API 682) DEP 31.29.00.33-Gen.
Dry gas seal systems for centrifugal compressors DEP 31.29.00.34-Gen.
Flexible couplings for mechanical power transmission - special purpose applications (amendments/ supplements to ISO 10441 and ISO 14691) DEP 31.29.00.36-Gen.
Pumps - type selection DEP 31.29.02.11-Gen.
Centrifugal pumps (amendments/supplements to ISO 13709) DEP 31.29.02.30-Gen.
Centrifugal submerged motor pumps (in refrigerated product or pressurised storage service) DEP 31.29.06.30-Gen.
Seawater lift pumps DEP 31.29.06.31-Gen.
Reciprocating positive displacement pumps and metering pumps
(amendments/supplements to API 674 and API 675) DEP 31.29.12.30-Gen.
Compressors - Selection, testing and installation DEP 31.29.40.10-Gen.
Centrifugal and axial compressors (amendments/supplements to API Std 617) DEP 31.29.40.30-Gen.
Reciprocating compressors (amendments/supplements to API 618) DEP 31.29.40.31-Gen.
Rotary-type positive displacement compressors (amendments/supplements to API 619) DEP 31.29.40.32-Gen.
Packaged, integrally geared, centrifugal plant and instrument air compressors
(amendments/supplements to API Std 672) DEP 31.29.40.33-Gen.
Liquid ring vacuum pumps and compressors (amendments/supplements to API 681) DEP 31.29.42.30-Gen.
Centrifugal fans (amendments/supplements to API 560, Appendix E) DEP 31.29.47.30-Gen.
Steam turbines - Selection, testing and installation DEP 31.29.60.10-Gen.
General-purpose steam turbines (amendments/supplements to API Std 611) DEP 31.29.60.30-Gen.
Special-purpose steam turbines (amendments/supplements to API Std 612) DEP 31.29.60.31-Gen.
Lubrication, shaft-sealing and control oil systems and auxiliaries for petroleum, chemical and gas industry services (amendments/supplements to API 614) DEP 31.29.60.32-Gen.
Combustion gas turbines - Selection, testing and installation DEP 31.29.70.11-Gen.
Combustion gas turbines (amendments/supplements to API 616) DEP 31.29.70.31-Gen.
Gas turbine combustion air intake and exhaust systems DEP 31.29.70.32-Gen.
Diesel engines DEP 31.29.80.30-Gen.
Spark ignited gas fuelled engines DEP 31.29.90.30-Gen.
2.2.6 Piping and pipelines
Title DEP Number
Side-entry mixers for storage tanks & vessels DEP 31.51.10.31-Gen.
Fabrication of heater piping DEP 31.24.49.31-Gen.
Pipeline transportation systems - pipeline valves (amendments/supplements to ISO 14313) DEP 31.36.00.30-Gen.
Piping classes - basis of design DEP 31.38.01.10-Gen.
Piping - general requirements DEP 31.38.01.11-Gen.
Piping classes - refining and chemicals DEP 31.38.01.12-Gen.
Compilation of bill of material for piping isometrics DEP 31.38.01.13-Gen.
Piping classes - exploration and production DEP 31.38.01.15-Gen.
Compilation of a specification for piping systems DEP 31.38.01.21-Gen.
Pipe supports DEP 31.38.01.29-Gen.
Shop and field fabrication of steel piping DEP 31.38.01.31-Gen.
Protective steam heating of piping systems DEP 31.38.30.11-Gen.
Hot-tapping on pipelines, piping and equipment DEP 31.38.60.10-Gen.
Pipeline engineering DEP 31.40.00.10-Gen.
Corrosion mitigation strategy for wet sour gas carbon steel pipelines DEP 31.40.00.19-Gen.
Riser design DEP 31.40.10.10-Gen.
Design of multiple-pipe slug catchers DEP 31.40.10.12-Gen.
Design of pipeline pig trap systems DEP 31.40.10.13-Gen.
Pipeline overpressure protection DEP 31.40.10.14-Gen.
Analysis of spans for submerged pipelines DEP 31.40.10.15-Gen.
Upheaval buckling of pipelines DEP 31.40.10.16-Gen.
Pipeline/trawlgear interaction DEP 31.40.10.17-Gen.
GRP pipelines and piping systems (amendments/supplements to ISO 14692) DEP 31.40.10.19-Gen.
CRA clad or lined steel pipe (amendments/supplements to API Spec 5LD) DEP 31.40.20.32-Gen.
Linepipe induction bends
(amendments/supplements to ISO 15590-1) DEP 31.40.20.33-Gen.
Welded and seamless duplex and super duplex stainless steel line pipe
(amendments/supplements to API Spec 5LC) DEP 31.40.20.34-Gen.
Linepipe for non-critical service (amendments/supplements to ISO 3183-1) DEP 31.40.20.35-Gen.
Weldable martensitic stainless steel line pipe for use in oil and gas operations (amendments/supplements to API Spec 5LC) DEP 31.40.20.36-Gen.
Linepipe for critical service (amendments/supplements to ISO 3183-3) DEP 31.40.20.37-Gen.
Pipeline fittings (amendments/supplements to MSS SP-75) DEP 31.40.21.30-Gen.
Pipeline isolating joints (amendments/supplements to MSS SP-75) DEP 31.40.21.31-Gen.
Pig signallers: Intrusive type DEP 31.40.21.33-Gen.
Carbon and low alloy steel pipeline flanges for use in oil and gas operations (amendments/supplements to MSS SP-44) DEP 31.40.21.34-Gen.
Thermoplastic lined pipelines DEP 31.40.30.34-Gen.
Hydrostatic pressure testing of new pipelines DEP 31.40.40.38-Gen.
Precommissioning of pipelines DEP 31.40.50.30-Gen.
Pipeline leak detection DEP 31.40.60.11-Gen.

Pipeline Repairs (supplements to ANSI/ASME B31.4 and B31.8) DEP 31.40.60.12-Gen.
Quarter-turn on/off actuators DEP 31.40.70.30-Gen.
L80 13%Cr casing and tubing (amendments/supplements to ISO/DIS 11960.2) DEP 39.01.20.10-Gen.
Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - technical delivery conditions (endorsement of ISO 13680) DEP 39.01.20.30-Gen.
Care and use of casing and tubing (endorsement of ISO 10405) DEP 39.01.20.31-Gen.
Shop and field fabrication of orifice meter runs DEP 61.38.10.10-Gen.
Welding of pipelines and related facilities (amendments/supplements to ANSI/API STD 1104) DEP 61.40.20.30-Gen.
Field welding of duplex and super duplex stainless steel pipelines (amendments/supplements to API 1104) DEP 61.40.20.31-Gen.
2.3 CONSTRUCTION MATERIALS
Title DEP Number
Metallic materials - selected standards DEP 30.10.02.11-Gen.
Non-metallic materials - selection and application DEP 30.10.02.13-Gen.
Metallic materials - prevention of brittle fracture DEP 30.10.02.31-Gen.
Materials for high-temperature conversion process furnace parts DEP 31.24.40.31-Gen.
2.4 WELDING, GENERAL
Welding of metals (amendments/supplements to API RP 582) DEP 30.10.60.18-Gen.
Welding on pressurised pipes (amendments/supplements to ANSI/API RP1107) DEP 30.10.60.30-Gen.
Oxidation of stainless steel weldments DEP 30.10.60.31-Gen.
2.5 MAINTENANCE AND INSPECTION
Field inspection prior to commissioning of mechanical equipment DEP 61.10.08.11-Gen.
Equipment and tools for maintenance
Mechanical maintenance equipment, tools and bolt tensioning DEP 70.08.10.11-Gen
Equipment and tools for maintenance and inspection
- Part 4 - Electrical workshop - Test equipment and tools DEP 70.08.10.13-Gen.
Equipment record cards DEP 70.10.01.10-Gen.
The preservation of old and new equipment and piping standing idle DEP 70.10.70.11-Gen.
Cleaning of equipment DEP 70.10.80.11-Gen.
2.6 OFFSHORE APPLICATIONS
Telecommunications for offshore platforms DEP 32.71.00.12-Gen.
Design of sea water systems and utility heat transfer systems for offshore installations DEP 37.05.10.10-Gen.
Design of hose bulk transfer facilities for offshore installations DEP 37.05.10.12-Gen.
Site specific assessment of mobile offshore jack-up units
(amendments/supplements to the SNAME guideline and recommended practice) DEP 37.11.00.30-Gen.
Drain systems for offshore installations DEP 37.14.10.10-Gen.
Design of offshore living quarters DEP 37.17.10.10-Gen.
Design of offshore temporary refuges DEP 37.17.10.11-Gen.
Design of steel substructures for fixed offshore platforms
(amendments/supplements to API RP 2A-LRFD) DEP 37.19.00.30-Gen.
Weldable structural steels for fixed offshore structures
(amendments/supplements to BS 7191) DEP 37.19.10.30-Gen.
Structural inspection of offshore installations DEP 37.19.60.10-Gen.
Firewater pumps for offshore installations DEP 37.29.01.10-Gen.
Subsea production systems (endorsement of ISO 13628 and API 17 series) DEP 37.80.00.30-Gen.
Mooring of mobile units DEP 37.91.10.11-Gen.
Oil loading and discharge hoses for offshore mooring installations
(amendments/supplements to OCIMF Guide) DEP 37.91.20.30-Gen.
Pedestal cranes (amendments/supplements to API Spec 2C) DEP 37.92.10.30-Gen.
Pedestal cranes (amendments/supplements Lloyd's code and BS 2573) DEP 37.92.10.31-Gen.
Offshore facilities life-saving appliance requirements (amendments/supplements to SOLAS) DEP 80.80.00.10-Gen.

明月天牙 · 发表于 2009-8-28 11:05

真多啊，LZ真是费心了。

mademan · 发表于 2009-9-17 21:47

很好的学习资料，可以学习英语和技术

dreamhaha · 发表于 2009-11-24 16:29

期待最新版的上市。。

zhonghuaguoji · 发表于 2009-11-24 17:00

非常感谢！

apohxs · 发表于 2010-3-8 16:24

楼上的大虾，能否把Non-metallic materials - selection and application DEP 30.10.02.13-Gen这个文件发一份给我，我的E-MAIL是apohxsh@163.com。积分不够，下载不了。

apohxs · 发表于 2010-3-8 16:25

非常感谢！

yanyingming · 发表于 2010-6-8 11:24

大哥这个太极品了，谢谢

知秋一叶 · 发表于 2010-6-11 23:55

非常感谢楼主了!