**********************************************************
**** PRO/II v8.1.3 (Patch to v8.1) *****
**** SIMSCI-ESSCOR Date: March 2008 *****
**********************************************************
The following README file contains installation instructions and a
list of changes (problems fixed or features added) that will be
implemented on PRO/II version 8.1 once this Patch is applied. This
patch can be installed over v8.1, 8.1.1, 8.1.2. PRO/II patches are
complete updates and there is no need to install earlier patches.
********************************
* How to install this Patch *
********************************
To install Proii81Patch3.zip:
1. Make sure you are not running PRO/II v8.1. This may be verified
through Task Manager in Windows 2000, Windows 2003 and XP.
2. To receive this Service Pack, copy and unzip the PROII81Patch3.zip
file on your system.
3. When prompted, enter the path to the directory where you want the
files to be unpacked (for example, C:\TEMP\PROII81).
Important: when you unzip the files, make sure to select the
"use folder names" option (or equivalent) so that the required
subdirectory structure is created at the location where the
file is unzipped.
4. After the file has been unzipped, go to the directory where
the files were extracted (for example, C:\TEMP\PROII81)
then go into the subdirectory "P2813".
Double click on setup.exe to begin installing the PRO/II patch.
This setup will install the PRO/II patch, updated Reports, S4M Portal,
TDM and Hysys(R) to PRO/II translator.
5. Select the "Next" Button on the Welcome Screen and then verify the
Path where the files are to be copied.
6. Select the "Finish" button. The Patch will be copied onto your
hard drive and will automatically begin installing.
7. When the installation of the PRO/II patch has been completed, the
following files will be updated on your system:
\Proii81\Bin\BATCHFRAC.dll
\Proii81\Bin\BvleGUI.exe
\Proii81\Bin\CapeOpenExec.dll
\Proii81\Bin\CapeThermo.dll
\Proii81\Bin\ExcelUop.dll
\Proii81\Bin\LMAccess.dll
\Proii81\Bin\MFLib.dll
\Proii81\Bin\MTCOMaterial.dll
\Proii81\BinMTCppGUI.dll
\Proii81\Bin\MTLib.dll
\Proii81\Bin\MTPointerLink.dll
\Proii81\Bin\MTWrapper.dll
\Proii81\Bin\P2Adapter.dll
\Proii81\Bin\P2Adapter.exe
\Proii81\Bin\P2Interface.dll
\Proii81\Bin\p2oledbs.exe
\Proii81\Bin\P2UIDbs.dll
\Proii81\Bin\PESCalcMain.dll
\Proii81\Bin\PESCommonsExported.dll
\Proii81\Bin\PESGuiMain.dll
\Proii81\Bin\PRU.exe
\Proii81\Bin\PV2.dll
\Proii81\Bin\RGLib.dll
\Proii81\Bin\ssidxi.dll
\Proii81\Bin\SSIODBC.dll
\Proii81\Bin\SSIPI.dll
\Proii81\Bin\toolkit2.dll
\Proii81\Bin\USERLB6.dll
\Proii81\Resource\assay.bin
\Proii81\Resource\cmpprop.bin
\Proii81\Resource\column.bin
\Proii81\Resource\defaults.bin
\Proii81\Resource\flash.bin
\Proii81\Resource\proiig.bin
\Proii81\Resource\rxndata.bin
\Proii81\Resource\Simsci.bin
\Proii81\Resource\thermo.bin
\Proii81\System\filcvt.dlt
\Proii81\System\p2.kgs
\Proii81\System\p2.kvf
\Proii81\System\p2.xsf
\Proii81\System\p2.xvf
\Proii81\System\p2prop.ini
\Proii81\System\PROII.err
\Proii81\System\PROII.sp1
\Proii81\System\PROII.sx1
\Proii81\System\PROII.sx2
\Proii81\System\schema.sdf
\Proii81\System\SSIRPT.xla
\Proii81\System\SSIRPT.XLS
\Proii81\System\UnitXML\Optimizer.xml
\Proii81\System\UnitXML\Common.xml
\Proii81\System\UnitXML\CSTR.xml
\Proii81\System\UnitXML\Stream.xml
\Proii81\System\UnitXML\PhaseEnvel.xml
\Proii81\System\UnitXML\Plug.xml
\Proii81\System\UnitXML\Stream.xml
\Proii81\SIM4MEPortal10\*.* /s (Some Excel Report files
have been updated)
\Proii81\Translator\*.* /s (Some Hysys(R) to PRO/II
translator files have been
updated)
\TDM\CFG\Data\Edlib_PROII_8.1.lb1
\TDM\CFG\Data\Edlib_PROII_8.1.lb2
\TDM\Plot\Plot.exe
\TDM\TDM30\*.* /s (Some TDM Report files
have been updated)
****************************************************
* New in PRO/II v8.1.3 *
****************************************************
Library and Databank Handling During File convertion and Import
Starting with PRO/II v8.0, PRO/II pointed to pure component and interaction
databanks located in library files registered by TDM in the Windows registry.
In some file conversion and file import cases there could be an ambiguity in
which databanks should be used. This may result in a file that points to the
wrong databank, or simply doesn't produce a usable file for v8.1.x. This
patch strengthens the logic and gives the user more opportunity to make the
correct unambiguous databank selection.
On import, if a databank is not found among the registered list, PRO/II will
now issue the appropriate error message as before, and the import continues
to open. Previously all record of the unregistered name disappears from the
resulting .prz file. Now the file name appears on the Databank Hierarchy list
with an indication that the library is unregistered. If nothing else is wrong
with the file, the resulting PFD will open and display a red component data
button to indicate the missing data, giving the user an opportunity to correct
the problem by registering the file via TDM.
Similarly, if a .prz file is opened and no registered library matches the
library found in that file, the file still opens and the component data button
will display red.
[ 本帖最后由 printer 于 2008-3-15 06:21 编辑 ] |
[复制链接]
狗仔卡
提升卡
置顶卡
沉默卡
变色卡