aspen+ 的warning

jianren222 · 发表于 2007-10-23 11:39

用aspen+计算时，出现如下警告：

  * WARNING IN PHYSICAL PROPERTY SYSTEM                   (LCLIMS.4)
   PARAMETER PC/ELEMENT  1 (DATA SET 1)
   UPPER BOUND VIOLATED FOR COMPONENT C
   VALUE =  0.22300E+09, UPPER BOUND =  0.10000E+09

  * WARNING IN PHYSICAL PROPERTY SYSTEM                   (LCLIMS.4)
   PARAMETER FREEZEPT/ELEMENT  1 (DATA SET 1)
   UPPER BOUND VIOLATED FOR COMPONENT C
   VALUE = 4300.0 , UPPER BOUND = 4000.0

请问PARAMETER PC/ELEMENT  和 PARAMETER FREEZEPT/ELEMENT指的是什么，谢谢

tree · 发表于 2007-10-23 13:04

PC是不是说临界压力, 0.223E+09超过了压力上限0.1E+09,

FREEZEPT是冰点.

jianren222 · 发表于 2007-10-23 13:08

谢谢回复

但是这两个参数不是输入的吧

jianren222 · 发表于 2007-10-23 15:44

PC Critical pressure 临界压力
freezept 冰点，凝固点

[ 本帖最后由 jianren222 于 2007-10-23 15:46 编辑 ]

jianren222 · 发表于 2007-10-23 16:36

Block: DECOMP Model: RYIELD
  * WARNING
   SPECIFIED YIELDS HAVE BEEN NORMALIZED BY A FACTOR OF (0.91484)
   TO MAINTAIN AN OVERALL MATERIAL BALANCE.

这个警告严重吗？
是什么问题呢？
谢谢

haifeng-1 · 发表于 2013-6-30 12:30

我和楼主遇到同样的错误：

The following messages were issued during Input Translation:
*  WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER PC/ELEMENT  1 (DATA SET 1)
UPPER BOUND VIOLATED FOR COMPONENT C
VALUE =  0.22300E+09, UPPER BOUND =  0.10000E+09
*  WARNING IN PHYSICAL PROPERTY SYSTEM
PARAMETER FREEZEPT/ELEMENT  1 (DATA SET 1)
UPPER BOUND VIOLATED FOR COMPONENT C
VALUE = 4300.0 , UPPER BOUND = 4000.0

不知道是什么原因，请高手帮忙~

haifeng-1 · 发表于 2013-6-30 12:31

不知道楼主解决了没有